As a leading NDT and Inspection company Bangladesh Industrial X-Ray
(BIX) is interested in receiving job applications from qualified
engineers, inspectors, supervisors, and technicians who wish to put
their knowledge and experience to good effect.
The following listing details some of the categories of personnel BIX
requires from time to time.
ASNT NDT Level III
If you are interested in being considered for employment please
forward a C.V. to firstname.lastname@example.org. Your C.V. should include
details of your qualifications, career progression, work experience
and any relevant specialist knowledge. Copies of your qualifications
or certificates should accompany your C.V.
Senior Radiographer / Interpreter
Duties include the supervision of other NDT Technicians and the
performance of film interpretation to client and industry standards.
Will be required to undertake any other NDT work as necessary.
Must successfully qualify by examination to Level II in film
interpretation including written general and specific papers and a
practical examination. These qualifications are renewable every three
Duties include: Ultrasonic flaw detection and thickness measurement,
magnetic particle and dye Penetrant testing.
Must be fully conversant with inspection procedures, standards and
industry codes (e.g. API-1104, ANSI B31-3, AWS D1.1, API-RP-)
- TECHNICIAN (RT/UT / MT / PT)
Qualified to ASNT Level II in RT, MT, PT, and UT
Must have knowledge of ASME Sec. V, API 1104, ANSI B-31, AWS D1-1.
- Fully conversant with API 650, ASME Sec. VIII & ASME Sec. V
With Working Experience of at least 3 years in flaw detection.
Familiar with USM-22B (KRAUTKRAMER), Epoch - 4B (Penametrics NDT)
Must have the training, education and experience required to qualify
as an American Welding Society-Certified Welding Inspector (AWS-CWI),
Must be competent in film interpretation with a thorough knowledge of
industry codes such as: AWS D1.1, API 620 or 650, ANSI B31.4 or B31.8,
ASME section V & IX or equivalent standards.
A minimum of 5 years industrial experience is required including at
least 6 years experience in Welding Inspection.
PRESSURE VESSEL INSPECTOR
Must have background experience or thorough knowledge of fabrication
or manufacturing of Coded Pressure Vessel, Columns and Heat Exchanger
Units. With a minimum of five (5) years experience (continuous).
Preferably having an active Mechanical Engineering background or have
been a Welder by previous experience and has related developed skills
in the discipline.
Has full knowledge of the inspection requirements of static equipments
per ASME Section VIII, TEMA from material preparation, and fit-up
assembly to full welding. Can read and interprets fabrication working
Has complete familiarization and working knowledge of Industry Codes
and Standards. Has knowledge of materials specification per code.
Must have a valid up to date AWS-CWI or CSWIP Certificates.
ASNT NDT LEVEL III
Must have current Level III certification issued by ASNT or equivalent
in one or more methods i.e. UT, MT. PT, RT, ET etc.
Must be capable of fulfilling the full scope of a practicing Level III
including, but not limited to: method application, interpretation of
results, interpretation of national codes and standards, preparation
of procedures, training of Level I and Level II personnel, etc.
minimum of 12 years industrial experience is required including at
least 6 years experience in the particular methods.
Must have the training, education and at least 10 years experience in